Mesh Screen
- -High energy absorbing.
- -Allows for movement without weakening the integral mesh strength.
- -The longitudinal wire strand is able to slip under load conditions through the cross wires to distribute load over several bolts.
- -Pig tail cross wire design allows for multiple take upon bolts.
- -Available in black or hot dip galvanized.
Product Details
Mesh Screen Introduction
The Mesh Screen is fixed to the rock surface. Rock bolts are installed through the holes between the wires and tightening washers/bearing plates must be used to ensure the bolts do not pull through the gaps between the wires.
Mesh Screen can be used in combination with shotcrete and/or thin shotcrete to provide support over large areas and protect rock surfaces from weathering.
| Properties | Technical Specificantion |
| Longitudinal Wire Diameter | 10mm |
| Cross Wire Diameter | 6mm |
| Nominal Length | 6000mm |
| Norminal Width | 300mm |
| Wire Aperture | 75mmX150mm |
| Yield Strength of Wire | 400MPa MIN |
| Tensile Strength of Wire | 500-750MPa |
Mesh Screen Packaging:
1. Steel or Fiber strapping.
2. Bundle sizes to suit the customer, generally packs of 25pcs
Leave your messages
