Mesh Strap for Coal Mine
- -High energy absorbing.
- -Allows for movement without weakening the integral mesh strength.
- -The longitudinal wire strand is able to slip under load conditions through the cross wires to distribute load over several bolts.
- -Pig tail cross wire design allows for multiple take upon bolts.
- -Available in black or hot dip galvanized.
Product Details
Mesh Strap for Coal Mine Introduction
Mesh Strap for Coal Mine are used in unstable ground conditions with seismic activity. They are used to improve and ensure a better connection between surface supports and bolts. Mesh Strap can be used in combination with shotcrete or thin shotcrete to provide support over large areas and protect rock surfaces from weathering.
| Properties | Technical Specificantion |
| Longitudinal Wire Diameter | 10mm |
| Cross Wire Diameter | 6mm |
| Nominal Length | 6000mm |
| Norminal Width | 300mm |
| Wire Aperture | 75mmX150mm |
| Yield Strength of Wire | 400MPa MIN |
| Tensile Strength of Wire | 500-750MPa |
Mesh Strap for Coal Mine Package
1. Steel or Fiber strapping.
2. Bundle sizes to suit the customer, generally packs of 25pcs.
Leave your messages


